RØDE HS1-B Headset Wireless Microphone

Rode HS1-B Headset Wireless Microphone

Featuring the pure, clear audio and low handling noise that RØDE is celebrated for, the HS1-B is built to deliver and to last. Subtle, ergonomic design including three axes of mechanical adjustment, and malleable, ultra lightweight tube arm and headband ensure the perfect fit for each individual. Knowing that versatility is paramount in any product, we at RØDE have developed the MiCon™ connector system which provides seamless integration between the HS1-B and a wide range of wireless systems. The RODE HS1-B Omnidirectional Headset Microphone Main Features Include:

• Ultra discreet appearance
• Three axes of mechanical adjustment for perfect ?t
• Malleable tube arm and headband for phone headset adjustment
• Ultra lightweight construction for complete comfort
• Right or left side configuration
• Incorporated cable management system
• Ø3.4 mm (Ø0.144”) miniature microphone
• Corrosion resistant stainless steel tube arm
• Incorporated moisture control belt to minimise sweat contacting the capsule
• Low handling noise
• RØDE MiCon™ connector system provides seamless integration with a wide range of wireless systems while maintaining discreet and unobtrusive appearance
• Gold plated connections
• Acoustic Principle: Permanently Polarised Condenser
• Directional Pattern: Omni-directional
• Frequency Range: 60 Hz ~ 18 KHz
• Output Impedance: 3k Ohms Typical
• Signal To Noise: Ratio 69 dB
• Equivalent Noise: 25 dBA SPL (per IEC651)
• Clipping SPL: 110 dB
• Maximum Output: 189 mV
• Sensitivity: -33.5 dB re 1 V/Pa (1.6 mV @ 94 dB SPL) ± 3 dB @ 1 kHz
• Dynamic Range: 85 dB Typical
• Power Requirements: Min 2 V ~Max 5 V through RØDE wireless adaptors P48 through RØDE XLR adaptor
• Output Connection: RØDE MiCon™ connector
5 Year Replacement Warranty Register your mic FREE within one month of purchase.

Posted in Headset Microphone, Headset Wireless Microphone, Omni-directional, Professional Audio Equipment, Rode HS1-B Headset Wireless Microphone | Tagged , , , , , , , , , , , , , , , , , , | 6,722 Comments

Samson AirLine 77 UHF TD Headset Wireless QV10e Microphone System, Channel N3

Samson AirLine 77 UHF TD Headset Wireless QV10e Microphone System, Channel N3

Product Features
Size: Channel N3
True Diversity UHF Wireless System with PLL Frequency Control
CR77 Receiver with Multi-segment Audio level, RF level and A/B Antenna Operation LED meters
Squelch control eliminates carrier signal noise and RF interference
Tuned molded antennas for accurate reception
XLR and unbalanced 1/4 inch outputs with mic/line level output switch
Product Details
Product Dimensions: 12 x 3 x 9 inches ; 5 pounds
Shipping Weight: 9 pounds. Item model number: SAM SW7AVSCV10 N3

Samson Airline 77 UHF Headset Wireless systems are an unbeatable combination. Samson Concert 77 UHF True Diversity Half-Rack Receivers matched up with Samson’s incredible Airline Series mini transmitters give you belt pack free mobility at new low prices. The QV headset microphone is great for vocals and is comfortable to wear. Ultra-light, ultra-compact, and incredibly efficient, Airline Series transmitters provide flawless wireless performance for 12 hours on a single AAA battery. No more wires crawling down your back from the headset. The CR77 true-diversity half-rack UHF receiver works flawlessly with all AirLine UHF transmitters. The CR77 receiver features a front panel display with large multi-segment audio level and RF level LED meters, and a large rotary volume knob allows easy adjustment of audio output. The new synthesized PLL frequency control circuitry keeps the signal locked and true while dual tuned molded antennas with LEDs monitor the true-diversity operation. The rear panel features balanced XLR and unbalanced 1/4-inch outputs allowing flexible connection options.

Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website.

See all reviews here.

OVERALL RATING: 5 out of 5 stars.

For full details or to buy the Samson AirLine 77 UHF TD Headset Wireless QV10e Microphone (Channel N3) now, click here.  Most orders are eligible free shipping.

Source of Buyer Reviews and Description: Amazon.com

Posted in Channel N3, Headset Microphone, Headset Wireless Microphone, Omni-directional, Professional Audio Equipment, Samson AirLine 77 UHF TD Headset Wireless QV10e Microphone System | Tagged , , , , , , , , , , | 6,777 Comments

Lavalier 6032UF UHF Dual Channel Wireless Microphone

Lavalier 6032UF UHF Dual Channel Wireless Mic

• Lavalier’s Two Lapel & Two Headband Headset Microphone Delivers High Quality Clear Sound
• UHF Band 670MHz-695MHz (Complies with new FCC frequency rule)
• Two Squelch Control Knobs (One for Each Channel) at the Rear Panel
• Two Independent XLR Balanced Outputs and One 1/4″ Unbalanced Audio Output
• Audio Level Adjustment Knob for the Transmitter & Transmitter Low Battery LED Indicator
• Shipping Weight: 11 pounds
• Item model number: AWM-6032UF
The 6032UF system comes with two lightweight wireframe & adjustable headband headset and two Lavalier microphones. The 6032UF system has been engineered to be dependable UHF system with a wide audio frequency range, high Signal to Noise ratio, and outstanding performance equal to that of any professional wireless systems costing much more. This is achieved through strict component selection and high quality circuit design. A delicately designed silence circuit eliminates static noise when the transmitters are either turned off or out of transmission range. An auto mute circuit is incorporated in these systems to effectively eliminate the popping noise when the switch is turned on or off. AC/DC Power Adapter Included. Includes: 2 Body-Pack transmitters, 2 CM518 Elastic Headband Headset, 2 Omnidirectional Condenser Lavalier (Lapel) Microphones, 1 AWR6031 Receiver, 1 3′ 1/4″ to 1/4″ Audio Cable, and 2 9V Batteries.

Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website.

Customer Reviews: ”I purchased this for group that meets once a month and they needed something to allow the speaker to move around the room. These work great with minimal feedback. They connected a little different then the setup we had but the adapter came with the set. We connect direct to the podium and we just have to shut off the podium mic when the lavalier is in use. 6032uf UHF Dual Channel Wireless Microphone with Two Headband Headset & Two Lapel (Lavalier) Mic”

“Product functioned as expected. THE UHF band ensures there is no interference from cell phones, bluetooth, wifi, etc. Just clear and uninterrupted audio source. Setup with intuitive and product construction is good. The headsets they delivered with the product are NOT ergonomic, so don’t be surprised when they don’t fit on your head well. The lapel microphones are golden though. In all, I bought this setup to record video interviews without having long wires strung about the studio. Worked like a charm! Great to be used in louder areas too where you only want to pick up voice audio and not background noise.”

See all reviews here.

OVERALL RATING: 4.5 out of 5 stars.

For full details or to buy the Lavalier 6032UF UHF Dual Channel Wireless Microphone now, click here. Most orders are eligible free shipping.

Source of Buyer Reviews and Description: Amazon.com

Posted in Headset Microphone, Headset Wireless Microphone, Lavalier 6032UF UHF Dual Channel Wireless, Omni-directional, Professional Audio Equipment, UHF Dual Channel Wireless Microphone | Tagged , , , , , , , , , | 6,556 Comments

Sennheiser HSP2 EW3 Wireless Head Microphone

Sennheiser HSP 2-EW-3 Head Microphone

The Sennheiser HSP2 EW3 is a high-quality permanently polarized condenser headmic with omni-directional pick-up pattern, designed for professional “hands free” applications. This version has a Beige finish and features an adjustable neckband that is visually unobtrusive and very comfortable to wear. For wireless applications, the headmic can be used with different Sennheiser bodypack transmitters, depending on the connection cable. For wired applications, the headmic can be used with the MZA 900 P / MZA 900 P-4 phantom power adapter.

Sennheiser HSP2 EW3 Features:
• Individually adjustable to all head sizes
• Neckband design keeps the microphone clear from shirt-collar or clothing
• Extremely thin microphone boom (1.1 mm), can be attached to the left or right side
• Microphone boom is adjustable in length and angle
• Patented Umbrella Diaphragm protects the microphone against sweat
• Connection cable can easily be interchanged
• All metal parts coated in a physical vapour deposition process (scratch-resistant)
• Boom microphone, Neckband, Connection cable, Plastic transport case, foam-lined with cut-outs and Operating instructions included with tis microphone

Sennheiser HSP2 EW3 Specifications:
• Frequency response: 20 – 20,000 Hz
• Pick-up pattern: Omni-directional
• Nominal impedance (1 kHz): 1 k Ohm
• Min. terminating impedance: 4.7 k Ohms
• Sensitivity: 2 mV/Pa
• Diameter of mic capsule: 4.8 mm
• Max. sound pressure level: 150 dB
• Equivalent noise level: 28 dB (A)
• Supply current approx:. 250 µA
• Power supply: 4.5 – 15 V
• Cable length 1.6 m
• Diameter of boom arm: 1.1 mm
• Weight: 2.1 g
• Connector: 1/8 inch (3.5mm) Mini (TRS) Output Jack for use with Evolution G2 series wireless systems
• Neckband Diameter: 1.1 mm
• Weight 4.4 g

Sennheiser MZA 900 P Phantom Power Adaptor

Sennheiser MZA 900 P Phantom Power Adaptor
The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 – 52 V phantom powering (P12 – P48). The connected microphone is supplied via the adaptor. The adaptor is also a quick and flexible solution if a microphone is to be used for both wired and wireless applications. One and the same microphone can be used together with the MZA 900 P for wired applications (e.g. in the studio) or with a transmitter of the evolution series for wireless applications.

 

The MZA 900 P is suitable for use with the following Sennheiser microphones:
• e 908 B
• e 908 D
• HSP 2
• HSP 4
• ME 2
• ME 3
• ME 4
• MKE 2 ew gold
Features:
• Robust metal chassis
• Switchable gain (0/-12dB)
• Switchable roll-off filter (125 Hz (-3 dB), 12dB/oct)
• Two-colour control LED (phantom power, audio peak)
• Input 3.5mm stereo jack socket, lockable
• Output XLR-3M
• Frequency response: 20 – 20000 Hz (-1dB)
• Gain: 0/-12 dB
• Output voltage: 1.8V (P48), 0.6V (P12) @ 0dB gain
• Output impedance: 100 Ohm
• Min. terminating impedance: 5kOhms (P12 – P48) @ 0dB gain; 2kOhms (P12 – P48) @ -12dB gain
• Phantom powering: P12 – P48, 10 – 52V, 2.6 – 2.8mA
• Dimensions: 19/22 mm, L 100 mm
• Weight: 60 g
• Operating temperature: -20°C to +60 degrees °C

Posted in Headset Wireless Microphone, Omni-directional, Professional Audio Equipment, Sennheiser HSP2 EW3 | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , | 3,717 Comments